Perfect for smaller listening rooms, the F301 is a compact, stand-mount or bookshelf loudspeaker offering outstanding flexibility and class leading performance. As a front stereo pair, the F301 excels at delivering dynamic bass and the musical articulation of more expensive designs. Its high current handling is equally at home in home theatre systems where the F301’s easy to drive nature and deep bass punch are compatible with a wide range of AV amplifiers and receivers.
A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.
Optimal performance of each of the F300 models is assured by using the highest quality precision components within the crossover, including low loss Low Frequency laminated core inductor and High Frequency polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning.
Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.
Utilising a multifibre reinforced paper cone on the bass/midrange drivers delivers natural sounding midrange frequencies and clean transient behaviour. Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics, coupled with FyneFlute™ technology, used on the driver’s rubber roll surround, provide a non-homogeneous interface which very effectively terminates unwanted cone energy.
The F-300 tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended time-aligned response.
|System Type||2 way, rear ported|
|Recommended amplifier power (Watt RMS)||25- 100|
|Continuous power handling (Watt RMS)||50|
|Sensitivity (2.83 Volt @ 1m)||89dB|
|Nominal impedance||8 Ohm|
|Frequency response (-6dB typical in room)||44Hz- 28kHz|
|Drive unit complement||1 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter|
|Crossover type||2nd order low pass, 3rd order high pass|
|Dimensions – HxWxD||300 x 190 x 271mm (11.8 x 7.5 x 10.7”)|
|Weight – Each||5.3kg (11.7lb)|
|Finishes||Walnut / Black Ash / Light Oak|
There are no reviews yet.